● Torque repeatability of ±2%, certified by ISO 5393 and VDI/VDE 2647 to ensure stable and consistent fastening performance.
● Quick torque adjustment for flexible operation, featuring an auto-stop function that halts fastening once the preset value is reached.
● Equipped with a high-quality Li-ion battery that lasts 100% longer than Ni-MH; the dual-color anti-slip grip enhances safety and reduces reaction force by 20%.
● Three-speed settings (Eco/Normal/Sport) allow for easy switching to save energy and extend tool life based on job requirements.
| Model | Torque Range (Nm) |
Free Speed (rpm) |
Length | Diameter | Standard Deviation |
Volt. | Weight (kg) |
|||
| Soft joint | ECO | NORMAL | SPORT | mm | mm | % | V | w/o battery |
w/2.5Ah battery |
|
| G-2-BCP031600 | 0.8-3.0 | 600 | 1000 | 1600 | 230 | 210 | ± 2 | 12~10.8 | 1.0 | 1.2 |
| G-2-BCP051900 | 1.0-5.0 | 1000 | 1400 | 1900 | 230 | 210 | ± 2 | |||
| G-2-BCP061550 | 1.0-6.0 | 800 | 1200 | 1550 | 230 | 210 | ± 2 | |||
| G-2-BCP081100 | 1.0-10.0 | 700 | 950 | 1100 | 230 | 210 | ± 2 | |||
| G-2-BCP101200 | 1.0-12.0 | 600 | 950 | 1200 | 230 | 210 | ± 2 | |||
| ● Dimensions & Weight: Parameters for weight, length, and height include a 2.0Ah battery. ● Input Voltage: 12V (Max) / 10.8V (Nominal) ● Torque Accuracy: Compliant with ISO 5393 Cmk > 2.2 ±10%. |
● ECO：For hard joint screwing with low speed. More energy saving and number of screwing. ● NORMAL：For normal screwing, and there is no other locking requirement for the power saving standard value, so use this mode. ● SPORT(High speed)：For soft joint screwing with high speed. High efficiency and low power consumption. |
|||||||||
▲ Tool length does not include the air inlet fitting. Specifications are subject to change without prior notice.
★ 【Customization】Custom specifications are available based on customer requirements. Please contact us for more details.
★ 【Note】Torque values are for reference only. Actual performance may vary depending on operating conditions and environment.
★ 【Note】To ensure component durability and extend tool lifespan, it is recommended that the working torque during use does not exceed 70% of the tool’s maximum torque capacity. Continuous operation at the maximum torque may accelerate component wear and shorten the overall service life of the tool. This guideline can also serve as an important reference when selecting the appropriate model.