T-MB Series | Automation Air Screwdriver (Single-Hole Air Start)
Model
T10MB,T20MB,T30MB,T35MB,T38MB,T40MB,T45MB,T48MB,T50MB,T55MB,T60MB,T65MB,T68MB
Application
Industrial Automation Tools
■ Adjustable Torque Settings
Allows users to easily increase or decrease torque by rotating the adjustment ring to meet specific operational requirements.
■ Single-Port Pneumatic Start with Auto Shut-Off
Instantly stops the motor the moment the preset torque value is reached, significantly boosting both precision and efficiency.
■ Color-Coded Torque Management
Enables effortless identification of torque ranges through distinct colors, effectively enhancing quality control across all automated tools.
■ Smart Monitoring via M5 Signal Ports
Detects tool start and stop states to record fastening cycles or identify screw stripping issues, maximizing overall operational accuracy.
| Model | Speed | Weight | Diameter | Air Pressure |
Min Air Hose Bore |
Air Consumption |
Torque Range |
Standard Deviation |
Fastening Capacity | |||
| A | B | C | Machine Screw |
Tapping Screw |
||||||||
| rpm | g | mm | mm | mm | kg/cm² | mm | m³/min | kgf-cm | % | |||
| T10MB | 1000 | 620 | 180 | 30 | 28 | 6.0 | 5.0 | 0.20 | 0.5-2 | ± 3 | M1.4-M2.2 | M1.1-M1.7 |
| T20MB | 1000 | 620 | 180 | 30 | 28 | 6.0 | 5.0 | 0.20 | 1-8 | ± 3 | M1.7-M3.4 | M1.4-M2.7 |
| T30MB | 1800 | 620 | 180 | 30 | 28 | 6.0 | 5.0 | 0.28 | 3-17 | ± 3 | M2.5-M4.3 | M2.0-M3.4 |
| T35MB | 2200 | 620 | 180 | 30 | 28 | 6.0 | 5.0 | 0.28 | 3-20 | ± 3 | M2.5-M4.5 | M2.0-M3.5 |
| T38MB | 1800 | 620 | 180 | 30 | 28 | 6.0 | 5.0 | 0.28 | 3-25 | ± 3 | M2.5-M4.8 | M2.0-M3.8 |
| T40MB | 1000 | 620 | 180 | 30 | 28 | 6.0 | 5.0 | 0.28 | 5-30 | ± 3 | M2.8-M5.0 | M2.3-M4.1 |
| T45MB | 800 | 620 | 180 | 30 | 28 | 6.0 | 5.0 | 0.30 | 8-40 | ± 3 | M3.4-M5.6 | M2.7-M4.5 |
| T48MB | 1700 | 1150 | 215 | 40 | 37 | 6.0 | 8.0 | 0.55 | 5-45 | ± 3 | M2.8-M5.8 | M2.3-M4.5 |
| T50MB | 1400 | 1150 | 215 | 40 | 37 | 6.0 | 8.0 | 0.55 | 7-50 | ± 3 | M3.2-M6.0 | M2.6-M4.8 |
| T55MB | 1000 | 1150 | 215 | 40 | 37 | 6.0 | 8.0 | 0.55 | 7-65 | ± 3 | M3.2-M6.5 | M2.6-M5.2 |
| T60MB | 550 | 1150 | 215 | 40 | 37 | 6.0 | 8.0 | 0.55 | 15-95 | ± 3 | M4.0-M7.2 | M3.3-M6.0 |
| T65MB | 330 | 1200 | 215 | 40 | 37 | 6.0 | 8.0 | 0.55 | 30-180 | ± 3 | M5.0-M9.2 | M4.1-M7.1 |
| T68MB | 250 | 1200 | 215 | 40 | 37 | 6.0 | 8.0 | 0.55 | 50-280 | ± 3 | M6.0-M10.8 | M4.8-M8.6 |
＊ Tool length does not include the air inlet fitting.
▲ Specifications are subject to change without prior notice.
★ 【Customization】Custom specifications are available based on customer requirements. Please contact us for more details.
★ 【Note】Torque values are for reference only. Actual performance may vary depending on operating conditions and environment.
★ 【Note】To ensure component durability and extend tool lifespan, it is recommended that the working torque during use does not exceed 70% of the tool’s maximum torque capacity. Continuous operation at the maximum torque may accelerate component wear and shorten the overall service life of the tool. This guideline can also serve as an important reference when selecting the appropriate model.
● Output Drive
| 1/4" Hex | 5mm | 1/4" Square (FOR 10~45 type) |
3/8" Square (FOR 48~68 type) |
| MB | MA | MW | MW |
【Installation Guide】
● By connecting with M5 signal port, PLC automation system can precise control the torque to avoid any float, loose or miss occurred.
● Air screwdriver clutch will be released and motor will stop automatically when load reach the preset torque.
● Water filter, pressure regulator & oiler are the devices required upon tube configuration.
● In order to assure the tube from pressure interference, installation of quick exhaust valve is a must with the use of the air tool.
● Connect M5 signal port with pressure sensor.
【Notes】
| Code | Description | Code | Description |
| T | Pneumatic supply | V | Quick exhaust valve |
| F | Filter | S | M5 pressure sensor |
| R | Pressure regulator | Z | Pneumatic screwdriver |
| L | Oil fog lubricator | X1 | 1/4”PT black Hex Inlet(lock) |
| E | Solenoid valve | M5 | M5 signal port |
HOT PRODUCTS
-
A-PS Series | Pistol Grip Manual-Start Air Screwdriver
-
R-BPN Series | Pistol Grip Cushion Clutch Air Screwdriver
-
R-PS Series | Pistol Grip Manual-Start Air Screwdriver
-
T-MPRB Series | Automation Air Screwdriver (Three-Hole Air Start)