QF-PBP | Series | Pistol Grip Oil-Free Air Screwdriver (Push-to-Start or Push + Trigger Start
Model
QF35PBP,QF38PBP,QF41PBP,QF47PBP,QF48PBP,QF50PBP,QF55PBP,QF60PBP,QF65PBP,QF68PBP
Application
Aerospace Industry Tools, Assembly Line Tools
■ Multi-Directional Inlet & Bottom Exhaust
Enhances operational flexibility while minimizing noise and exhaust disruption on the assembly line.
■ Patented Interlocking Track Clutch
Guarantees minimal error and delivers exceptionally stable and high-precision fastening performance.
■ Pull-to-Release Quick-Change Design
Supports rapid bit changes to significantly boost operational efficiency while extending the tool's lifespan.
■ Once-a-Week Maintenance Schedule
Requires lubrication only once a week to reduce maintenance burdens and ensure stable operation—maximizing efficiency while lowering costs.
■ Oil-Lubricated vs. Oil-Free: Lubrication and Protection
| Item | Oil Tools | Oil-Free Tools |
|---|---|---|
| Maintenance Methods | Daily regular oiling | The oiling cycle is about 7 Days(168hours) |
| Oil Specifications | Use Spindle Oil or Standard Air Tool Oil |
Use M&L [High Speed Spindle Oil(CP-OIL01) ] |
| Maintenance Accessibility | Readily Available Oil & Quick Maintenance |
Significantly Reduced Maintenance Frequency & Time Savings |
| Extended Service Life | Reduced Internal Wear & Extended Service Life |
Stable Lubrication for Continuous Long-Term Operation |
| Working Efficiency | Consistent Torque & Smooth Operation |
Lower Downtime Risk & Enhanced Line Productivity |
| Value Proposition | Simplified Maintenance with Controllable Costs |
The Ultimate Choice for Low Maintenance & High Efficiency |
■ Two Actuation Modes
Mode 1: Direct Push-to-Start (Trigger Locked).
Engage the trigger lock for direct push-to-start operation.
Engage the trigger lock for direct push-to-start operation.
Mode 2: Safety Interlock Start (Mistake-Proofing).
Requires both trigger activation and tool engagement to prevent bit slippage and screw head damage; this
safety mechanism may add approximately 1 second to the start-up time.
[Note: The most common operation is pushing the tool down before pressing the trigger.]
Requires both trigger activation and tool engagement to prevent bit slippage and screw head damage; this
safety mechanism may add approximately 1 second to the start-up time.
[Note: The most common operation is pushing the tool down before pressing the trigger.]
| Model | Speed | Weight | Length | Diameter | Air Pressure |
Min Air Hose Bore |
Air Consumption |
Torque Range |
Standard Deviation |
Fastening Capacity | |
| rpm | g | mm | mm | kg/cm² | mm | m³/min | kgf-cm | % | Machine Screw |
Tapping Screw |
|
| QF35PBP | 2200 | 640 | 180 | 33 | 6.0 | 5.0 | 0.28 | 3-20 | ± 3 | M2.5-M4.5 | M2.0-M3.5 |
| QF38PBP | 1800 | 640 | 180 | 33 | 6.0 | 5.0 | 0.28 | 3-25 | ± 3 | M2.5-M4.8 | M2.0-M3.8 |
| QF41PBP | 1000 | 640 | 180 | 33 | 6.0 | 5.0 | 0.28 | 5-35 | ± 3 | M2.8-M5.0 | M2.3-M4.0 |
| QF47PBP | 550 | 640 | 180 | 33 | 6.0 | 5.0 | 0.28 | 10-50 | ± 3 | M3.5-M6.0 | M2.9-M4.8 |
| QF48PBP | 1700 | 980 | 215 | 39 | 6.0 | 8.0 | 0.55 | 7-50 | ± 3 | M3.2-M6.0 | M2.6-M4.8 |
| QF50PBP | 1400 | 980 | 215 | 39 | 6.0 | 8.0 | 0.55 | 10-60 | ± 3 | M3.5-M6.2 | M2.9-M5.0 |
| QF55PBP | 1000 | 980 | 215 | 39 | 6.0 | 8.0 | 0.55 | 12-75 | ± 3 | M3.8-M6.8 | M3.0-M5.5 |
| QF60PBP | 550 | 980 | 215 | 39 | 6.0 | 8.0 | 0.55 | 30-110 | ± 3 | M5.0-M7.7 | M4.1-M6.2 |
| QF65PBP | 300 | 1100 | 215 | 39 | 6.0 | 8.0 | 0.55 | 30-180 | ± 3 | M5.0-M9.2 | M4.1-M7.1 |
| QF68PBP | 250 | 1250 | 215 | 39 | 6.0 | 8.0 | 0.55 | 50-280 | ± 3 | M6.0-M10.8 | M4.8-M8.6 |
▲ Tool length does not include the air inlet fitting. Specifications are subject to change without prior notice.
★ 【Customization】Custom specifications are available based on customer requirements. Please contact us for more details.
★ 【Note】Torque values are for reference only. Actual performance may vary depending on operating conditions and environment.
★ 【Note】To ensure component durability and extend tool lifespan, it is recommended that the working torque during use does not exceed 70% of the tool’s maximum torque capacity. Continuous operation at the maximum torque may accelerate component wear and shorten the overall service life of the tool. This guideline can also serve as an important reference when selecting the appropriate model.
● Multi-direction Air-inlet feature Featuring a professional multi-inlet design
Top (Optional), Bottom, and Rear (Optional). This enhances workspace flexibility, allowing operators to
adjust the air intake direction to suit specific application needs.
adjust the air intake direction to suit specific application needs.
● Air Inlet Orientation Adjustment
| Lower Air Inlet Change to Upper | ||||||||||||
 |
| Switching from Bottom to Side Air Inle | ||||||||||||
 |
| Reverting to Bottom Air Inlet (Factory Standard) | ||||||||||||
 |
||||||||||||
HOT PRODUCTS
-
T-MB Series | Automation Air Screwdriver (Single-Hole Air Start)
-
R-LBN Series | Straight Cushion Clutch Air Screwdriver
-
R-PB Series | Push Start Type Air Screwdriver
-
A-ABF Series | Angle Type Oil-Free Low-Reaction Air Screwdriver